Why is the load-bearing capacity of elevator guide rail components strong
Information summary：The strong load-bearing capacity of elevator guide rail components is the result of the synergistic effect of multiple factors such as material characteristics, structural design, processing technology, and installation accuracy. The core goal is to ensure the stability and safety of the elevator car and counterweight (balance weight) during high-speed operation, start stop, and load changes. Belo
The strong load-bearing capacity of elevator guide rail components is the result of the synergistic effect of multiple factors such as material characteristics, structural design, processing technology, and installation accuracy. The core goal is to ensure the stability and safety of the elevator car and counterweight (balance weight) during high-speed operation, start stop, and load changes. Below is an analysis of the specific reasons:
1、 Material selection: High strength substrate provides the foundation for load-bearing
The core material of elevator guide rails is high carbon steel (such as S355JR, ST52-3 and other low-alloy high-strength steels), and its mechanical properties directly determine the upper limit of bearing capacity:
High yield strength: The yield strength of this type of steel is usually above 350MPa (far exceeding the 235MPa of ordinary low-carbon steel), which means that it is not prone to plastic deformation (bending or fracture) when subjected to large loads and can maintain structural stability for a long time.
Good toughness: Through processes such as rolling and heat treatment, steel has both strength and toughness, and can withstand the impact force during elevator start and stop (such as the inertia force during sudden loading of the car or emergency braking), avoiding brittle fracture.
Uniform material density: Using high-quality continuous casting steel billets for rolling, the material has no defects such as pores or interlayers inside, ensuring uniform load distribution and avoiding early damage caused by local stress concentration.
2、 Structural Design: Section Optimization for Efficient Force Transmission
The cross-sectional shape of elevator guide rails (such as T-shaped, hollow guide rails, special guide rails) is precisely calculated through mechanics, and optimized through parameters such as "sectional inertia moment" and "bending section coefficient" to achieve efficient bearing of vertical loads and horizontal forces
T-shaped guide rail (most commonly used):
The cross-section is T-shaped and consists of a vertical web plate (connected to the guide rail bracket) and a horizontal flange (the working surface where the car/counterweight guide shoe contacts).
The thickness of the vertical web plate is relatively large (usually 8-12mm), which can withstand the vertical gravity of the car and transfer the load to the building structure (wall or load-bearing beam) through guide rail brackets;
The width of the horizontal wing edge is sufficient (usually 50-120mm), with a large contact area with the guide shoe, to disperse the lateral force of the car (such as car deflection, wind load, or centrifugal force during curved operation) and avoid excessive local pressure.
Hollow guide rail (for heavy-duty or low-speed elevators):
The cross-section is a closed rectangle or groove shape, and the hollow structure reduces weight while enhancing overall torsional and bending resistance through the "closed cross-section", suitable for bearing vertical loads and guiding forces of counterweights.
Special guide rails (such as T75 and T89 types for high-speed elevators):
For high-speed elevators (speed>2.5m/s) with large loads and high impact forces, the cross-sectional size is larger (with increased flange width and web thickness), and the moment of inertia is increased by more than 30%, which can resist vibration and impact during high-speed operation.
3、 Processing technology: Strengthen material properties and structural accuracy
The machining process of the guide rail further enhances its load-bearing capacity through "rolling+heat treatment+precision machining":
Hot rolling forming: After multiple passes of rolling, the internal grain size of the steel billet is refined, and the mechanical properties are more uniform. At the same time, the cross-sectional size accuracy is controlled within ± 0.5mm to ensure the fit with the guide shoe and bracket, and to avoid uneven load distribution caused by gaps.
Surface hardening treatment: The working surface of the guide rail (the flange surface in contact with the guide shoe) is quenched and tempered to a hardness of HB200-250, which not only improves wear resistance (reduces dimensional wear caused by long-term friction), but also enhances surface compressive strength (the pressure of the guide shoe on the guide rail can reach more than 10MPa).
Straightness and parallelism control: Through cold straightening technology, the straightness error of the entire length of the guide rail (usually 3-5m/piece) is ≤ 0.5mm/m, and the distance deviation between two parallel guide rails is ≤ 1mm, ensuring that the car/counterweight is symmetrical in force during operation and avoiding additional bending moments caused by tilting.
4、 Installation and fixation: rigid connection with building structure
The guide rail is not independently load-bearing, but is rigidly connected to the main structure of the building (concrete wall, steel structure load-bearing beam) through the guide rail bracket, forming a load transmission chain of "guide rail bracket building structure":
High strength fixation of guide rail bracket:
The bracket is welded with angle steel, channel steel or steel plate, and is rigidly connected to the building structure through expansion bolts, embedded steel plates, etc. Each bracket can withstand a vertical load of 5-10kN (equivalent to a weight of 500-1000kg), ensuring that the fixing points of the guide rail will not loosen or deform.
Multi point dispersed load:
A bracket is set every 1.5-2m along the height of the guide rail in the shaft to distribute the total load of the car (usually carrying 800-2000kg) and the counterweight (up to 3000kg or more) to multiple support points, avoiding excessive pressure on the bracket and limiting the deflection (bending deformation) of the guide rail within 0.5mm/m.
5、 Collaborative components: Collaborative load-bearing of guide shoes and rails
The load-bearing capacity of the guide rail also depends on the coordination of the guide shoe (the part of the car/counterweight that contacts the guide rail):
Guide shoes (such as rolling guide shoes and sliding guide shoes) evenly transmit the load of the car to the guide rail working surface through elastic structures (springs, rubber pads), avoiding stress concentration caused by local point contact;
The rolling guide shoes of high-speed elevators adopt a bearing structure to convert sliding friction into rolling friction, reducing friction while ensuring the stability of load transmission.
Phone Number：Panlixin 13706201799 Panliyong 13306238299
Service Hotline：0512-52468216
Company Address：Zhangjiaqiao, Xinzhuang Town, Changshu City
Technical Support：Lange chain enterprise
Ch
En
Add wechat
Contact us
Telephone